All products are sourced direct from Pro Tapes LLC, USA and supplied in full carton quantities. Sizes and pack counts below reflect standard carton configurations — contact us for specific requirements.
Matte cotton cloth tape with a synthetic rubber adhesive. Hand tearable, weather resistant and cleanly removable from most surfaces. The core professional tape for stage, film, broadcast and live events.
18 colours across matte neutrals and solids. The standard choice for most production and technical environments.
The same high-performance gaffer cloth in UV-reactive fluorescent colours. UV light friendly for high visibility in stage, concert and event environments.
Short 6-yard rolls for kit packing and smaller jobs. Available in bulk (plain bag) and retail-ready (carded) pack formats. Same matte cloth and adhesive as full-length Pro Gaff.
A more economical alternative to Pro Gaff for general AV and cable hold-down use. Polyethylene coated cloth backing with natural rubber adhesive — holds cables cleanly to floors and surfaces in AV, event and installation environments where full gaffer performance is not required.
Narrow matte cloth tape for stage position marking, rehearsal spikes and colour-coded set identification. Same high-performance adhesive system as Pro Gaff — stays down until you want it off, then removes cleanly.
Full colour range in narrow ½″ width — 13 standard matte and 5 fluorescent. Used for actor marks, scenery positions, prop tracking and colour-coded floor identification.
Four fluorescent Pro Spike rolls shrink-wrapped as one bundle — one roll of each colour per stack. An all-in-one kit for stage managers and production departments that need multiple colour identification from a single purchase.
Five fluorescent Pro Spike rolls bundled together — adds Fluorescent Blue to the 4-colour set. Full-length 20-yard working rolls for production departments.
Compact 6-yard fluorescent spike stack for kit bags, touring packs and quick stage marking where full-length rolls are not needed. Fixed 5-colour set supplied as one stack.
Pocket-size 6-yard fluorescent camera stack in a fixed 5-colour set for camera, kit labelling and compact colour-coded marking. Supplied as one stack.
Zone-coated gaffer tape with adhesive on both edges and a smooth, non-adhesive centre tunnel for routing cables cleanly across floors. High strength, weather resistant, cleanly removable.
Adhesive on both outer edges secures the tape firmly to the floor while the smooth centre strip lets cables run through freely and be repositioned without sticking. Holds firmly for extended periods and removes without residue.
Photoluminescent vinyl tape that absorbs energy from any ambient light source and glows in total darkness. Non-radioactive, rechargeable indefinitely, and designed for indoor safety, stage and egress marking.
Charges under fluorescent lamps or natural daylight and provides up to 10 hours of positive luminance when fully charged. Flexible vinyl film is die-cuttable to custom shapes. Used for stage spiking, step edge marking, exit identification and light switch marking in dark backstage areas.
Premium vinyl tape for seaming and joining dance floors, stage vinyl and temporary performance surfaces. Low-profile edge, strong hold, and clean removal that leaves the surface undamaged.
Highly conformable vinyl tape designed specifically for dance floor splicing and safety marking. Satisfies all OSHA marking requirements. Abrasion resistant with a natural rubber resin adhesive that holds securely without damaging the surface underneath.
Carried because of Artstag's direct working relationship with Pro Tapes. These are not widely stocked by general distributors and are best enquired about directly.
Opaque black paper masking tape designed for photographic and darkroom use. Blocks light completely, leaves no residue, and tears cleanly by hand. Used for masking light leaks, borders and film edges in controlled-light environments.
Double-coated cloth tape with adhesive on both sides for bonding carpets, rugs and floor coverings to hard surfaces. High tack adhesive holds securely under foot traffic and removes cleanly without surface damage. Suitable for temporary or semi-permanent installations.
Flame retardant matte fabric with adhesive on one side, used as a backdrop in movie studio and broadcast environments. Consistent colour across dye lots with a brushed matte finish.
Optically clear polypropylene film tape with a non-yellowing acrylic adhesive. Specifically designed for splicing and repairing lighting gels and scrollers where temperature resistance and film stability are critical.
Custom-printed version of Pro Gaff in fluorescent base colours with black "CAUTION CABLE" text. Covers, protects and clearly identifies cables on event floors and in public-facing areas. High visibility for greater safety at concerts, trade shows and AV events.
Premium flatback paper tape for colour coding, labelling and console marking. Repositionable and removes cleanly without staining or ghosting — ideal for sound boards and lighting control desks. Printable with markers, pens and flexo inks.
Vinyl plastic insulating tape for wire splices, harness wrapping and general electrical maintenance. Flame retardant, cold weather resistant, non-corrosive. Stays flexible at low temperatures and performs continuously up to 105°C.
Printed gaffer tape pre-marked with metric measurements for quick, accurate distance marking on sets, stages and studio floors. Eliminates the need for separate measuring tools during layout and rigging. Hand tearable and removes without residue.
Artstag has a direct working relationship with Pro Tapes and can support enquiries for both standard and lower-demand items. All orders are supplied in full carton quantities. If you need a specific size, colour or product not shown here, get in touch.